Boat Plans Canada
In the course of beveling the bottom edge of the transom, I took a couple of chunks out of the endgrain of the starboard side frame. Then, I head a ***CRACK*** on one pass of the plane. I ripped a sizeable piece of the side frame away from itself. I carefully chiselled off the exposed end, and on another pass from the plane... ***CRACK*** and I took another strip, this one very deep. I can epoxy this all together, but Id just as rather not have the integrity of the wood comprised. I only had one remaining bevel left with an endgrain, and I beveled it with a rasp and then planed the rest to match. Dammit-- This is an amateur mistake! Other amateurs beware!
Take note that I did not break the epoxy bond between the side frame and the transom ply, the surface layer of the side arm remains firmly glued to the ply.
Do you find information about Boat Plans Canada are you looking for? If not, below may help you find more information about the Boat Plans Canada. Thank you for visiting, have a great day.
0 komentar:
Posting Komentar