Boat Plans Arch Davis
WELL
Informative day today as I peddled my rudder stock idea over at Mr. Storers forum.
There was enough persuasion action going to keep me going with the plans in term of a backless rudder stock with a daggerboard rudder. However, I really want to be able to ditch the tiller and leave the rudder installed on the transom.
I came up with this idea:
In this plan, the rudder stock stays exactly as the plans stipulate, except I add on 15mm at the top. This provides an area to attach a cleat (blue). Then theres another below it (blue) and the tiller-- which is two pieced-- cradles the rudder stock. Bolts run through the cleats into the spacer, and the tiller which slides between the cleats is held in place with a pin.
Storer warns that the torsional forces on the tiller could tear it apart, Im hoping that between the three cleats bolted through the spacer, and a bolt higher up on the tiller (not shown) to keep it together, I should be ok. Time will tell. I am almost positive this is the model Im going with, unless I get overwhelming evidence otherwise.
In other news, I finished rough shaping the rudder and daggerboard.
Nice.
Do you find information about Boat Plans Arch Davis are you looking for? If not, below may help you find more information about the Boat Plans Arch Davis. Thank you for visiting, have a great day.
0 komentar:
Posting Komentar